©
Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | [email protected] | www.rgblink.com
35
Users only read the version information above which is consistent with the menu version but can not
modify.Different types of the machine has different information.
Update file:
Click "Browse ..." installation,to select the upgrade file in the pop-up window.
Click on the "Upgrade" button,the upgrade dialog will appear. the device will reboot automatically after update
successfully. (Note:make sure the power and network is keeping connected during the process.or the upgrade will
fail)
Note: After the version upgrade is complete, you need to restore factory defaults; a, through web to restore the
factory default configuration; b, through the recovery menu; c, remote control shortcut * # 6;
Choose one of the above three ways. If chose a, the IP accounts, passwords also need to be restored to the default.
5) Restore factory setting
Click on pop-up "Restore Factory Defaults" button and choose “YES” or “NO”,then the device will restart
automatically and restore factory setting .
6) Reboot
Click on the pop-up "Reboot" button and choose “YES” or “NO”,then the device will restart automatically
3.7 Logout
Point "Logout" pop‐up "Confirmation" dialog; select "Yes" or "No",choose “Yes” to exit the current page and
return to the user login interface again.
