RGBlink RGB-RD-UM-4K, User Manual

Page: 31 / 51

4K Ultra HD NDI CAMERA User Manual
30
Gamma : Gamma value setting (default, 0.45, 0.50, 0.55, 0.63 optional).
Dynamic Contrast : Set the dynamic contrast (default off, 1
～
8 optional)
Flip Horizontal : Set Flip Horizontal (default Off, On optional).
Flip Vertical: Set vertical flip (default Off, On optional). Electronic
Zoom: Set the electronic zoom (default Off, Onoptional)
a. Noise Reduction: 2D noise reduction, 3D noise reduction and dynamic dead pixel correction
available. 2D Noise Reduction : Set 2D noise reduction level (default 3, Auto, 1-7 and Offoptional).
3D Noise Reduction
: Set 3D noise reduction level (default 5, 1-8 and Off optional).
Dynamic dead pixel correction: Set Dynamic dead pixel correction (default Off, 1-5 optional).
Note:
Click “Refresh” to make revision of any video parameters of a, b, c, d, e effective.
5) Character-Overlapping
Display date and time: Set whether to display the time and date (default display).
Display Title: Set whether to display the title (default display).
Font Color of Time: Set font color of time and date (default white, black, yellow, red, and blue optional).
Font Color of Title: Set font color of title (default white, black, yellow, red, and blue optional).
Moving characters : Set the display position of moving date, time and title, click on the "up, down, left, right"
buttons to move the corresponding character position.
Title Content: Set title content (defaultCAMERA1).
Time Content: Set time content (default 1970/01/10 05:36:00)
Click on the "Save" button and display the "Save successful" message, then valid
6) Character Size
Main stream character size : Set the character size of the display, the device will restart
automatically after changed and saved (default 48, 28-200 optional)
Secondary stream character size: Set the character size of the display, the device will restart automatically after
changed and saved (default 48, 28-200 optional)
Click on the "Save" button to display "Parameter saved successfully" message, set to take effect
7) Video output
Output format: 3840x2160P60, 3840x2160P50, 3840x2160P30,3840x2160P25,
1080P60, 1080P50, 1080P30, 1080P25, 1080I60, 1080I50, 720P60, 720P50
Click on the "Save" button, it will be valid when display "Save successful".
3.4.6
Network Configuration
1)
Network port
Data port: Set the data port, the device will restart automatically after changed (default 3000, 0-65535
optional)
Web Port : Set Web port, the device will restart automatically after changed (default is 80, 0-65535 is optional)
Onvif Port : Set Onvif port, the device will restart automatically after changed (default 2000, 0-65535 optional)
Soap Port : Set Soap port (default 1936, 0-65535 optional)
RTMP Port: Set RTMP port (default 1935, 0-65535 optional)
RTSP Port : Set RTSP port, the device will restart automatically after changed (default 554, 0-65535 optional).
Visca Port : Set Visca port, the device will restart automatically after changed (default 3001,0-65535 optional).
Click on the "Save" button, it will be valid when display "Save successful".
RTSP Obtaining method: rtsp: // device IP address: 554 / live / av0 (av0 main stream; av1 secondary stream)
RTMP Obtaining method: rtmp: // device IP address: 1935 / live / av0 (av0 main stream; av1 secondary stream)