RGBlink RGB-RD-UM-4K, User Manual

Page: 29 / 51

4K Ultra HD NDI CAMERA User Manual
28
44100, 8000, 16000, 32000 and 48000 optional, G.711A default 8000)
Sampling Precision : Set sampling precision (default 16bits)
Compressing Code Rate : Set audio compressing code rate (default 64bits, 32, 48, 96, 128bits optional)
Input Volume : Set the input volume (default 2, 1-10 optional)
Click “ Save ” , it will remind ” Enable has changed. Restart the device to take effect after the success of the save. ” ,
then please reboot the camera to make new setting effect.
3.4.5 Video Configuration
1)
Video Encoding
Code stream: Stream: Different video output mode setting, use different streams.(Main stream, secondary
stream)
Compression Format: Set the video compression format, save and reboot to take it effect (main / secondary
stream default: H.264, H.265 optional)
Profile: Set Profile mode (default HP, BP, MPoptional
）
Video Size:
Set video image resolution, save and reboot to take it effect (main stream default
1920*1080, 3840*2160, 2592*1944, 2304*1296, 1920*1080, 1280*720 optional; default secondary
stream320*180, 640*360, 320*240, 640*480, 320*180, 1280*720 optional )
Stream Rate control: Set rate control mode, save and reboot to take it effect (main / secondary stream default
variable bit rate, fixed rate is for option).
Image Quality: Set the image quality, image quality can be changed only when rate control is variable bit
rate,(main stream defaulted is better, secondary stream default is not good, there are best, better, good, bad,
worse, worst for options).
Rate (Kb / s): Set the video bit rate (main stream default 8192b/s, 64-40960Kb/s optional; secondary stream
default 512Kb/s, 64-40960Kb/s optional).
Frame rate (F/S): Set the video frame rate (main/ secondary stream default 25F/S, main stream 5-60F/S optional,
secondary stream 5-30F/S optional).
Key frame interva l: Set the key frame interval (main / secondary stream default 100, main stream 1-300F optional.
secondary stream 1-150F optional).
Stream Name : When streaming via rtsp or rtmp, user can modify stream name. Main Stream (live/av0), secondary
stream (live/av1)
Click the "Save" button to display the "saved successfully" message, then settings take effect.
2)
Stream Release
Switch: To turn on/off the main / secondary stream.
Protocol: Primary / secondary stream applies RTMP protocol.
Host Port: Server port number (default 1935, 0-65535 optional)
Host Address: Server IP addresses (default 192.168.5.11)
Stream Name: Choose a different stream name (live / av0, live / av1 optional).
User: Set the user name.
Password: Set the password.
Click on the "Save" button to display the "Save successful" message, then settings take effect.
Method of obtaining RTSP: RTSP: // device IP address: 554 / live / av0 (av0 main stream; av1 secondary stream)