Q2
User Manual
45
3.3 XPOSE APP Control
Q2 support to load scene via XPOSE APP.
(Note:The device and phone must be in the same network)
Connect Q2 and phone
Method 1:Connect wireless in the same WIFI
Method 2:Direct connection
(1) Install XPOSE APP in your phone first and then click
to open it,click
“
search
”
(2)
Select Q2 model and click the icon
in the top
right corner
(3) Fill in the IP address of Q2,and then click
“
OK
”
.Now
the device and Q2 is connected.
Load Scene
Red indicates current scene,green indicates the save
scene,white indicates blank scene
e.g: As shown in the right picture,it is in Group 1 Scene2,
click 1 to switch to Group 1 Scene ;If you need to load
scenes in other groups,select group first and then the
scene.
