RGBlink PTZ AI, User Manual

Page: 22 / 49

PTZ AI Tracking Camera User Manual 2
3.4 Remote Controller
3.4.1 Keys Instruction
1. Standby Key
After 3S long press, the camera will step into standby mode. Long press 3S
again, the camera will
self-test again and back to HOME position. (Note: If power-on mode is turned
on and Preset 0 is
set, and there is no operation within 12s, it will automatically point to the
specified preset position.
2. Camera Address Selection
Select the camera address which wants to be controlled
3. Number Key
Set or run 0-9 presets
4. *,# Key
Key combination use
5. Focus Control Key
Auto Focus: Enter into auto focus mode.
Manual Focus: The camera focus mode is manual
Switch the camera focus mode to manual focus by pressing [focus +] or [focus
-] to adjust
6. Zoom Control Key
Zoom
＋
:Lens near
Zoom
－
:Lens far
7. Set or Clear Preset key
Set Preset: Set preset key + 0-9 number key:
Clear Preset key: Clear preset key + 0-9 number key