RGBlink GX2L, User Manual

Page: 41 / 53

GX2L/GX4L User Manual 41
4.5 Upgrade
2
4 3
1
9. After <Smart Settings>,it will return to <Receiving
card>interface and set a new parameters for receiving
cards.
①
Fill in the total Width/Height of box.
There is no need to adjust other parameters if the image
of the single receiving card is normal.
②
It is recommended to change
“
grayscale series
”
and
“
low ash effect
”
to change the refresh rate.
③
Send to receive card:
Each time you change the
parameters, you can click
“
Send to receive card
”
and
observe the change of the screen.
④
Save to the receive card: After debugging,click “ Save
to the receiving card
”
and the data will not be lost after
power off and restart.
1.
Click
“
Setup
”
--
“
Hardware upgrade
”
.
2. Type in password
“
admin
”
or 168.