RGBlink G3 NET 2K Quick Start Manual Download Page 5

Page: 5 / 48

Address

：

S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925788216

Email: [email protected] http://www.rgblink.cn

Hardware Orientation

Front Panel

Display

OLED Display

Displays current status of the product, and for feature selections provides interactive
choices in conjunction with buttons on the front panel.

LCD Display

Displays the video, for preview.

Multi-Function Buttons

Rotary Button

This button used for menu selections and confirmation.
The button is both rotary (turn to left and right), and push-button (confirm selection)

Illuminated Buttons

MENU Button

This button used for menu selections.
Push the button again will return to the last level menu or exit the menu.

SCALE Button

This button used for size and position adjusting.

PIP Button

This button used for single and double image switching.

MAP Button

This button used for sender card controlling.

TAKE Button

This button used for seamless effect switching.

Summary of Contents for G3 NET 2K

















































Search results

Summary of Contents for G3 NET 2K

Reviews:

RGBlink G3 NET 2K, Quick Start Manual, Page: 5 / 48

Search results

Summary of Contents for G3 NET 2K

Reviews: