RGBlink G3 NET 2K Quick Start Manual Download Page 19 | Manualshive

Page: 19 / 48

RGBlink G3 NET 2K Quick Start Manual Download Page 19

Address

：

S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925788216

Email: [email protected] http://www.rgblink.cn

18

Custom TP Button

1. Push the [MENU] button, and enter to the menu items. Turn the rotary knob, and select <SYSTEM>.

2. Push the knob to confirm. Turn the rotary knob, and select <Customized Button>, push the knob to confirm.

3. Push and turn the rotary knob, TP and BLACK can be selected.

If select <TP>, push [BLACK/TP] button, the button is lit, and enter to the TP menu items.

Port:

Select the port.

Test Grid:

Select “On” or “Off”.

Automatic: The test grid automatically matches the port, based on the LEDs/Row and Column.
Manual size: Set the width and height of each cell in the test grid.

Grid Color:

Assign the grid color.

BACKUP

>>

TEST PATTERN

>>

->SYSTEM

>>

FACTORY RESET

>>

OLED Brightness

12

Front Panel Lock

>>

->Customized Button

>>

Tech Support

>>

Customized Button

->TP

TP

->Port

Port 1

Test Grid Off

Grid Color Red

Type Cross

->Test Patterns Auto Move

Moving 30

Patterns Color White

«
...
17
18
19
20
21
...
»

Summary of Contents for G3 NET 2K

















































Reviews:

No comments