FLEX 8
User Manual
14
3.1.2 Button Operation
Power Up
After the device is connect to power, it will automatically boot up. After the device is
powered up LCD shows the following:
Select output
Press any button among 1-8 in OUT area, the corresponding output can be selected and
the button light illuminates.
Select input
After the output is selected, press the button among 1-8 in IN area and the button
flashes.The corresponding input is taken to the output immediately.
Select ALL output
Press button ALL
and all buttons in OUT area light up, then press any button in IN
area, all outputs display the one selected input. For example, after pressing button ALL
and press button 6 in IN area, all the displays shows the image of input 6. The LCD on
device shows the info below:
Press button ALL again, all lights go out except button 1 in OUT.
SAVE
If the IN→OUT (matrix) setting need to be saved, press button SAVE , LCD will show
O:1 2 3 4 5 6 7 8
I : 1 2 3 4 5 6 7 8
O:1 2 3 4 5 6 7 8
I : 6 6 6 6 6 6 6 6
Summary of Contents for FLEX 8
Page 1: ...FLEX 8 Article No RGB RD UM FLEX 8 E001 Revision No V1 1 USER MANUAL...
Page 11: ...FLEX 8 User Manual 10 1 2 4 Dimension Following is the dimension of FLEX 8for your reference...
Page 46: ...FLEX 8 User Manual 45 Use shortcut key to operate fast and easily...
