DXP H0404
User Manual
23
3.5 Ethernet Control
Initial IP Configuration
Setup MATRIX IP Address same as your PC with same domains.(Default 192.168.0.10)
MATRIX IP Address method, please refer. to
“
ETHERNET
”
Chapter
Input IP Address on a web page, you could link to the Web UI of the MATRIX host.
Web UI Operation
SWITCH SETTING
Power
: Control MATRIX power on and standby.
Output
: Display output 1~4, it can change the display name by the Aliases page
.
Input
: Display input 1~4, this field is a drop down menu,
this field is a drop-down
menu, a drop-down menu include Input 1 ~ 4 and OFF, It can change the display name by the
Aliases page.
Reload
: Get MATRIX host message.
Advanced
: Enter into the
“
Advanced
”
page.
Apply
: Complete the setting
All Port
: Set all output from input 1~4 or off at once.
