© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
|
|
www.rgblink.com
8 / 28
【
TAKE
】
Button
When CIUS power on, system default is HDMI input signal. To switch signal, press CVBS,VGA,DVI or SDI. For
example, to switch to VGA, push
【
VGA
】
button and the button flashes. Keep pressing
【
TAKE
】
button for 3s
，
enter switch mode as follows. Press
【
TAKE
】
again, it will bring the VGA signal to output.
【
TAKE
】
is default 1s duration of FADE. To adjust the duration time, push
【
MENU
】
, turn the knot to select
<TRANSITION> menu. Press the knob and turn to select DURATION. Press the knob again and turn the knob to
select time. DURATION time range from 0.1s to 1.0s. Press
【
TAKE
】
again, it will bring the adjusted FADE mode to
screen.
By
【
TAKE
】
, users can preview on LCD the signal format and resolution of the picture about to show on the big
screen therefore the accuracy of picture can be ensured.
INPUT
：
HDMI
TAKE
：
VGA
OUTPUT
：
1920X1080@60
I
NPUT
：
VGA
TAKE
：
HDMI
OUTPUT
：
1920X1080@60
MODE
FADE
>DURATION
1s
ALPHA
0
DEINTERLACE
ON
I
MAGE ENHANCE
OFF
