RGBlink 710-1008-01-0, User Manual

Page: 19 / 69

Felxpro 8 User Manual 18
3.2.2 Topology Diagram
XPOSE 2.0 offers the feature of making topology diagram which can assist users to import the
actual input and output connection into XPOSE control.
1. Drag device, input source device and output device from the list on the left based on the field
application. For example, drag Flexpro 8 from Device, Laptop from Input and LDC from Output list
as follows:
2. Click the icon at the right bottom corner and open the setting interface as following:
2.1. After Flexpro 8 is dragged into the topology diagram interface, users can find how many
Flexpro 8 devices currently linked in the same network from the drop-down arrow after SN.