General Information
Quick Touch Pendant User Guide
Page 11 of 22
0510-0516-C
To insert or replace the battery:
1. Using the alarm clearance card or a
quarter, turn the battery door counter-
clockwise to unlock (align with open
padlock icon).
2. Remove the battery door.
3. Insert the CR2032 coin cell battery in
the battery compartment. Be sure to
align the positive (+) end of the battery
(plus side up) as marked inside the
battery holder.
4. Place the battery door so that the arrow
lines up with the open padlock icon. Use
the alarm clearance card or quarter and
turn clockwise until locked.
5. Press the activation button to verify the
transmitter alarms then clear the alarm.
Alarms
When a resident activates the button on a
Quick Touch Pendant, an Assistance
Required alert is generated.
If the Quick Touch Pendant is supervised,
and no messages are received from the
Pendant for at least the supervision interval,
a Communication Failure alert is generated.
Alarm
Activation
To activate the alarm, press and hold the
button for at least one second. When
activated, the Quick Touch pendant vibrates
briefly and the red light flashes until the
alarm is cleared.