Wireless Camera/Baby Monitor
RF-Link
AWV-9600
Features:
1.
Crisp picture and voice quality.
2.
Handset size monitor, suitable for hand-held, pocket, or stationary display.
3.
Power save mode by turning video off when only voice monitoring is needed.
4.
Use 2.4GHz ISM band for RF transmission.
5.
Battery for 3 hours audio & video operation, or 5 hours voice only operation.
6.
Receiver can output to TV or VCR.
7.
Other applications include security surveillance, activity monitoring, etc.
How to use:
1.
Identify the following parts:
a)
Wireless Camera unit
b)
Wireless Receiver unit
c)
Two power adapters
(Input: either AC120V/60Hz for US or AC230V/50Hz for Europe)
d)
Ear Phone - RCA cable
e)
This Instruction pages
2.
To activate wireless camera:
a)
Plug the power adapter into the power jack.
b)
Turn on the power with the power on/off switch.
c)
Select any one of the channels with Channel selector.
3.
To activate wireless receiver:
a)
Plug power adapter in to power jack or install 3 AA batteries.
b)
Push power on/off button to turn on the power.
c)
Set the channel same as the one on the camera.
d)
Adjust the volume control.
e)
Now the receiver shall start to function
4.
Silent mode / Video mode
a)
You can enter the power saving mode when baby is silent by simply pressing
the “Display on/off” button once
b)
When some voice heard, the receiver will automatically go back to video mode
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including interference that
may cause undesired operation.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the authority to operate equipment.
Power On/Off
Display On/Off
Brightness
Volume Control
Channel Selector
Display
Status Indicator
Power Jack
Line Out
Ear Phone
Receiver
Antenna
Power Indicator
Lens
IR LED
Microphone
Power Jack
Power On/Off
Channel selector
Camera