REXROTH RD 500 Series, Applications Manual

Page: 226 / 276

8-10
Parameter Value Assignment RD 500 RD51
DOK-RD500*RD51*******-IB04-EN-P
Standard terminal assignment
Para-
meter
No.: Name Description / explanation
selectable options
Factory
setting
min ... max
values
Pass-
word
0875 Dig. input,
output1 I no function 1
Combined digital input and output
0 = I no function (I = input)
:
2 = I
no alarm ext. (alarm)
3 = I no fault ext. (fault)
4 = I fault reset
5 = I fmin select
6 = I direct. rotat. (direction of rotation reversal)
7 = I no volt. disc. (power disconnected)
8 = I no fast stop (fast stop)
9 = I RFG park (RFG = ramp-funct.gener.)
10 = I RFG-up stop
11 = I motp. faster (motp. = motorized potentiometer)
12 = I motp. slower
:
21 = I
TEST / STANDARD (toggles between the
TEST and STANDARD
modes, simultaneously
disables the changeover
from the operator panel.)
22 = I setp. mem. bit0 (weighting 2
0
: Changes-over
the f set, f min, fmax memory
and the ramp-function
generator)
23 = I
setp. mem. bit1 (weighting 2
1
: Changes-over
the f set, f min, fmax memory
and the ramp-function
generator)
24 = I
setp. mem. bit2 (weighting 2
2
: Changes-over
the f set, f min, fmax memory
and the ramp-function
generator)
25 = I
setp. mem. bit3 (weighting 2
3
: Changes-over
the f set, f min, fmax memory
and the ramp-function
generator)
26 = I
parblock bit0 (weighting 2
0
: Changes-
over the specific motor data
:
32 = IN no alarm. ext. (IN=input which is only active in
the “STANDARD” mode)
33 = IN no fault ext.
34 = IN fault reset
35 = IN fmin select
36 = IN direct. rotat.
37 = IN no volt. disc.
38 = IN no fast stop
39 = IN RFG parking
40 = IN RFG-up stop
41 = IN motp. faster
42 = IN motp. slower
:
0...98