REXROTH IndraDyn A Series, Project Planning Manual

Page: 145 / 220

Rexroth IndraDyn A Connection Techniques
8-1
8 Connection Techniques
8.1 Notes
Power cables and connectors are not in the scope of delivery of the
motor. They have to be ordered separately.
Bosch Rexroth offers an extensive program of ready-made cables and
plug-in connectors that are optimally adapted to the products and to a
wide range of demands.
Decisive advantages of Bosch Rexroth ready-made cables are:
•
Pre-wired without additional finishing necessary
•
Laid out for use in applications with continuous bending
•
Resistant against mineral oils, grease and biologic oils; silicon- and
halogen-free; low adhesion
•
Use of licensed cables according to UL and CSA
•
Burning characteristics fulfill VDE0472-804 requirements
•
Maintain EMC guidelines
•
Protection class up to IP67
Note:
Note that self assembled cables or cable systems of other
manufactures may not fulfill these criteria.
Bosch Rexroth shall not be held responsible for
malfunction or damages resulting from use of non-Bosch
Rexroth cables.
You can find additional information ...
•
on selecting power and encoder cables for
IndraDyn A
from the
following descriptions in this chapter.
•
on selecting power and encoder cables for
IndraDyn A
in the
Documentation “Rexroth Connection Cables”, MNR R911280894.
•
for assembling
cables and plugs
, as well as technical data, in the
documentation "Rexroth Connection Techniques, Assembling and
Tools...", MNR R911280895.