13
Connections of the Components in the Drive System
13.1
System Connections of the Components
13.1.1
General Information
Electrical connections for operating the drive system Rexroth IndraDrive:
In the System Environment
●
Connection X3 or PE to equipment grounding system
●
Connection X3 to supply with power voltage
●
Connection X13 or terminal block 0V / +24V to supply with control volt‐
age
●
Connection to control unit and/or master communication
Within the Drive System
●
Equipment grounding conductor connections PE to X3 or joint bars at
the devices
●
DC bus connections L+ with bars
●
DC bus connections L- with bars
●
Control voltage connections 0V with bars
●
Control voltage conne24V with bars
●
Module bus connections X1 with ribbon cable
●
Motor power connections via motor power cable at X5
●
Connections for motor temperature monitoring and motor holding brake
via motor power cable at X6
DOK-INDRV*-SYSTEM*****-PR06-EN-P
Rexroth IndraDrive Drive Systems with HMV01/02 HMS01/02, HMD01, HCS02/03
Bosch Rexroth AG
221/309
Connections of the Components in the Drive System
