REXROTH IndraControl L25 CML...3N Series, Project Planning Manual

Page: 28 / 72

Fig.5-3: Left view (the cut-out for the top-hat rail is located in the center)
5.3 Installation Notes
● Avoid installation locations that are exposed to direct sunlight because this
causes additional heat.
● Keep as much distance as possible to noise sources
● Lay all connecting cables in loops and use strain reliefs for all cables.
● Keep as much distance as possible to noise sources.
● Provide the following minimum clearances for sufficient cooling:
100 mm
100 mm
30 mm
30 mm
30 mm
Fig.5-4: Minimum distances for the circulation of surrounding air
● Additionally, provide sufficient clearance for mounting, dismounting, con‐
nector and cable length.
Bosch Rexroth AG DOK-CONTRL-IC*L25*****-PR03-EN-P
Rexroth IndraControl L25
26/69
Dimensions