REXROTH Fv Series, Instruction Manual

Page: 77 / 222

7.3.3 Category E - Extended Parameters
Group E0: Input Terminals
Type
Function
code
Name Setting range
Minimum
unit Factory
default
Attribute
Multi-
function
digital
input
terminals
E0.00
2-wire/3-wire
control mode
0: Forward/Stop, Reverse/Stop
1: Forward/Reverse, Run/Stop
2: 3-wire control
1 0 ◆
E0.01 Terminal X1 0: Inactive
(allows multiple selection)
1: Multi-speed control 1
2: Multi-speed control 2
3: Multi-speed control 3
4: Multi-speed control 4
5: Acceleration/deceleration time 1
6: Acceleration/deceleration time 2
7: 3-wire control
8: Freewheel to stop
9: Frequency increment Up
10: Frequency decrement Down
11: Set frequency to 0
12: (Reserved)
13: Activate DC brake
14: Switch between operating panel and
external terminal control
15: Simple PLC deactivated
16: Simple PLC paused
17: Switch between speed and torque
control
18: Switch between VR1 analog and +I
analog reference
19: External fault N.O contact input
20: External fault N.C contact input
21: External Reset input
22: Activate communication control
1 0 ◆
E0.02 Terminal X2 1 0 ◆
E0.03 Terminal X3 1 0 ◆
E0.04 Terminal X4 1 0 ◆
E0.05 Terminal X5 1 0 ◆
E0.06 Terminal X6 1 0 ◆
E0.07 Terminal X7 1 0 ◆
E0.08 Terminal X8 1 0 ◆
DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv Bosch Rexroth AG 75/219
Parameter Settings