REXROTH Fv Series, Instruction Manual

Page: 76 / 222

Group S3: Run Parameters
Type
Function
code
Name Setting range
Minimum
unit Factory
default
Attribute
Jog
S3.00 Jog frequency 0.00 − b1.05 0.01 Hz 5.00 Hz ◆
S3.01 Jog acceleration time 0.1 − 3600.0s 0.1s 5.0s ◇
S3.02 Jog deceleration time 0.1 − 3600.0s 0.1s 5.0s ◇
Skip
frequen‐
cy
S3.03 Skip frequency 1 b1.07 − b1.06 0.01 Hz 0.00 Hz ◆
S3.04 Skip frequency 2 b1.07 − b1.06 0.01 Hz 0.00 Hz ◆
S3.05 Skip frequency 3 b1.07 − b1.06 0.01 Hz 0.00 Hz ◆
S3.06 Skip frequency range 0.00 − 30.00 Hz 0.01 Hz 0.00 Hz ◆
Restart
after
power
off or
power
fault
S3.07
Restart after power off
or power fault 0: Deactivated
1: Activated
1 0 ◆
S3.08
Waiting time to restart
after power off
or power fault
0.1 − 10.0s 0.1s 1.0s ◆
S3.09
Direction change
dead time
0.0 − 3600.0s 0.1s 4.0s ◆
S3.10 Droop control 0.00 − 10.00 Hz 0.01 Hz 0.00 Hz ◆
S3.11 Setting velocity via Up/Down 0.10 − 100.00 Hz/s 0.01 Hz/s 1.00 Hz/s ◇
S3.12 Brake unit threshold 600 − 785 V 1 V 770 V ◆
S3.13 Brake hysteresis voltage 5 − 20 V 1 V 10 V ◆
S3.14
Motor standard
rotation direction
0: Standard motor direction
1: Reverse standard motor direction
2: Deactivate reverse motor rotation
1 0 ◆
S3.15 Stop key validity
0: Valid only for operating panel control
1: Valid for all control means
1 1 ◆
S3.16 Fan control
0: Temperature controlled
1: Always on
1 0 ◇
Bosch Rexroth AG DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv
74/219
Parameter Settings