REXROTH Fv Series, Instruction Manual

Page: 28 / 222

2.8 Protection During Handling and Mounting
In unfavorable conditions, handling and assembling certain parts and compo‐
nents in an improper way can cause injuries.
Risk of injury by improper handling! Bodily in‐
jury by bruising, shearing, cutting, hitting!
CAUTION
● Observe the general construction and safety regulations on handling
and assembly.
● Use suitable devices for assembly and transport.
● Avoid jamming and bruising by appropriate measures.
● Always use suitable tools. Use specific tools in different circumstances.
● Use lifting equipment and tools in the correct manner.
● If necessary, use suitable protective devices (for example safety gog‐
gles, safety shoes, safety gloves).
● not stand under hanging loads.
● Immediately clean up any spilled liquids because of the danger of skid‐
ding.
2.9 Protection Against Pressurized Systems
According to the information given in the Project Planning Manuals, motors
cooled with liquid and compressed air, as well as drive controllers, can be
partially supplied with externally fed of pressurized media, such as com‐
pressed air, hydraulics oil, cooling liquids, and cooling lubricating agents. In
these cases, improper handling of external supply systems, power supply
lines, or connections can cause injuries or damages.
Risk of injury by improper handling of pres‐
surized lines!
CAUTION
● Do not attempt to disconnect, open, or cut pressurized lines (risk of ex‐
plosion).
● Observe the respective manufacturer's operating instructions.
● Before dismounting lines, relieve pressure and empty medium.
● Use suitable protective devices (for example safety goggles, safety
shoes, safety gloves).
● Immediately clean up any spilled liquids from the floor.
Environmental protection and disposal! The agents used to oper‐
ate the product might not be economically friendly. Dispose of
ecologically harmful agents separately from other waste. Observe
the local regulations in the country of assembly.
Bosch Rexroth AG DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv
26/219
Safety Instructions for Electric Drives and Controls