REXROTH Fv Series, Instruction Manual

Page: 18 / 222

1.3 Fv Description
1.3.1 Certification
CE Certification
Declaration of conformity For Fv devices, there are declarations of conformity which confirm that the
devices comply with the applicable EN standards and EC Directives. If re‐
quired, you can ask our sales representative for the declarations of conformi‐
ty.
Description Standard
CE conformity regarding Low-Voltage Directive
EN 61800-5-1
(IEC 61800-5-1: 2007)
CE conformity regarding EMC product standard
EN 61800-3
(IEC 61800-3: 2004)
CE Label
Fig.1-12: CE label
High-Voltage Test
According to standard, the components of the Rexroth Fv are tested with high
voltage.
Test Test rate
High-voltage test 100 % (EN 61800-5-1)
High-voltage insulation test 100 % (EN 61800-5-1)
Before making a high-voltage test for the installation in which the
components are used, disconnect all connections to the compo‐
nents or disconnect the plug-in connections to protect the elec‐
tronic components.
UL Certification
Fv products are in process of UL certification.
1.3.2 Properties of the Basic Device Fv
● Allowed ambient temperature: -10 − 40 ℃;
● Protection class: IP20 (Control cabinet mounting)
● Power range: 0.4 to 15 kW
● Power supply voltage: 3 AC 380 to 480 V (-15 % / +10 %)
● High start-up torque and precise motor speed control
● Overload capacity:
–
150 % of rated current for 60s
– 180 % of rated current for 10s
● Output frequency: 0 to 400 Hz
Bosch Rexroth AG DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv
16/219
Introduction