REXROTH Fv Series, Instruction Manual

Page: 12 / 222

1.2 Introduction to the Drive System
1.2.1 Delivery and Storage
Brief Introduction
Check the unit for transport damages, e.g. deformation or loose parts, imme‐
diately after receipt/unpacking. In case of damage, contact the forwarder at
once and arrange for a thorough review of the situation.
This is also applicable if the packaging is undamaged.
The Scope of Supply Consists of
Standard model
●
Frequency Converter Fv, protection class of IP20 (Control cabinet
mounting)
● Fv firmware
● Integrated brake unit
● Operating panel
● Instruction manual
Optional accessories
●
Operating panel for control cabinet mounting
● Optional PROFIBUS adapter
● RS232/485 adapter
● Engineering software
● Optional EMC filter (EN 61800-3 Environment 2)
● dV/dt filter
● Main choke
● Brake resistor
Transport of the Components
Ambient and operating conditions-Transport
Description Symbol Unit Value
Temperature range
T
a_tran
℃ -25…70
Relative humidity % 5…95
Absolute humidity
g/m 3
1…60
Climate category (IEC 721) 2K3
Moisture condensation not allowed
Icing not allowed
Fig.1-2: Transport conditions
Bosch Rexroth AG DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv
10/219
Introduction