Band knife machine R750/R1000 – Instruction manual
Page
46 / 89
FPUH Rexel s.c.
ul. Radziwoja 11, 61-057 Poznań
tel.: +48 61 87 68 946
www.rexelpoland.com
6.7
M
ACHINE REPAIRS AND RESTART
Any repairs to the machine leading to the replacement of parts, including
drive components, etc., may only be carried out by the manufacturer's service
personnel or qualified outside service team.
All repairs carried out to the machine must be made so no changes are made
to its construction or operation.
The purpose of repairs must be to restore the machine to its initial state. Any
other modifications to the machine are forbidden!
After repairs and inspections, the machine should be tested before it is put into
operation. In particular, it is necessary to check the operation of exchanged or
repaired components and their interaction with other elements of the machine
at all stages of its operation.
DANGER
WARNING!!!
Never change or install any machine elements, in particular those
responsible for safety, ie. covers, locks (magnetic safety switches),
emergency stop buttons and others.
Modification of the machine can lead to serious risks!
Any changes to the machine without the risk awareness causes a serious
threat to life and property. All consequences of such actions will not be
covered by warranty and service support.
DANGER
WARNING!!!
Never attempt to perform repairs without sufficient knowledge, skills,
qualifications and training.
In the absence of sufficient knowledge, skills, qualifications and training,
contact the machine manufacturer's service or machine manufacturer.
Unauthorized repair personnel are exposed to an unspecified risk.
In case when repair is carried out improperly, an unspecified risk may
appear.
