REWIRE SECURITY DB3, User Manual, Page: 85 / 122

9.4.13 SMS Data Sending Settings (ID=1250)
Parameter allows or does not allow sending AVL data using binary SMS. If SMS
use is not allowed value is 0 and 1 if SMS use is allowed.
Minimum
value Maximum
value Recommended
value
Goes with (depends on)
parameters Value
type
0 1 - S8
9.4.14 Authorized Phone Numbers (ID=1260-1269)
If at least one number is entered then only those number can send messages to
the device.
The list is also checked in Location by call function. The number must be
entered without “+” or “00”.
Example : 37060012346.
Minimum
value Maximum
value Recommended
value
Goes with (depends on)
parameters Value
type
1 digit 16 digits - S8[17]
If SMS data sending is enabled (ID=1250) first value in a list is server GSM
number. The SMS with panic priority will be sent.
9.4.15 SMS Event PreDefined Numbers (ID=150-159)
In this field are written GSM numbers, to which will be sent “Event SMS” text
message. The number must be entered without “+” or “00”.
Example : 37060012346.
Minimum
value Maximum
value Recommended
value
Goes with (depends on)
parameters Value
type
1 digit 16 digits - S8[17]