Revolution 211373, User Manual

Page: 6 / 28

6
EN
4. TECHNICAL DATA
Hot drinks boiler HENDI – single-walled
Item Dimensions
[mm] Capacity
[l] Time to boil the whole
bowser [min] Power
[W] Voltage &
frequency Weight
[kg]
211373 285x325x(H)345 6 25±5min 1300 230V~ 50Hz 1,9
211380 345x370x(H)410 12 30±5min 2250 230V~ 50Hz 2,6
5. HOW TO USE
DEVICE INTENDED ONLY FOR HEATING WATER OR WINE.
• Remove all packages before use.
• It is recommended you clean your urn before the
first use.
• Make sure the tap is closed.
• Fill the tank with tap water. Make sure the water
is below the “MAX “ water level indicator.
• Place the lid and turn clockwise to lock into place
(picture 1 and 2).
• Connect the plug and the socket.
• Switch ON the appliance by pressing the switch.
It works in this way until the “HEATING” pilot
lamp goes out and the “KEEP WARM” pilot lamp
lights up, showing that the appliance is in the
state of preserving heat.
• Use the faucet to dispense water.
• Always make sure at least three cups of water
are remaining in the tank to prevent the boil-dry
accident (it can lead to burning the heater out).
When about three cups of water are remaining
in the tank, turn the appliance off and unplug it
from the electric outlet.
Pict. 1. Put the lid on the bowser. Pict. 2. Turn clockwise to lock into place.
Remark: Photos are just for reference only. It may vary with the actual product.
6. MAINTENANCE TIPS
• Always pull the plug from the wall socket and
completely cool down before cleaning the urn.
• If the urn is subjected to heavy use, you will need
to de-scale it at regular intervals.
• Never immerse the urn in water or other liquid
cleaning products.
• Clean the urn with a damp cloth.
• Never use abrasive or caustic cleaning products.
• Always ensure the electrical connections remain
absolutely dry.
• When you drain off dirty water, leave the tap open
and rinse the urn with clean water.