Revolution 147122, User Manual

Page: 12 / 28

12
EN
Connecting the gas bottle
1 = Main tap
2 = Pressure regulator
3 = Gas hose
4 = Gas Bottle
5 = Rubber washer
Attach the pressure regulator to the gas bottle
using the large brass nut. Always ensure that the
rubber-sealing washer is present in the nut. (NB.
This rubber washer is not required for UK-type
pressure regulators). Tighten the nut well. Note
that the nut has a left-hand thread.
Check the connections for leaks using a soap and
water solution.
Every time a newly filled gas bottle is connected, a
new rubber washer must be fitted. In most cases,
your gas supplier will include it with the bottle.
Instructions for use
Ignition:
1 2 3
4 5
1. Push down the control knob.
2. While pressing, turn the control knob to the igni-
tion position (lightning).
3. While knob is in this position press the ignition
button several times
4. Keep the control knob pressed for 10-15 seconds
5. Move the control knob to the desired setting be-
tween and .
If the flame fails to remains lit, repeat the procedure, keeping the control knob pressed in for a few extra
seconds.