Page 1/4
ReVerie Ltd
Tel: 01206 866663
Unit 2, Chandlers Row
02081 235997
Port Lane
Fax: 01206 868144
Colchester
E-mail: [email protected]
Essex, CO1 2HG
Skype: Reverie_Composites
R01SB0482
Introduction
This part is required to fit our extended carbon diffuser which improves down force and also further
reduces drag. The part features cnc machined carbon side grille vents to let out hot air radiated
from the exhaust.
Please if Dyno testing the car remove this part and any carbon mid floor or diffuser fitted
as there is a danger without air flow the carbon could ignite.
Parts Available:
R01SB0482
Exige V6 S3 Rear diffuser surround
LOTUS DISCLAIMER
Although ReVerie Limited supply parts for use with/on vehicles manufactured by Lotus Cars Limited, ReVerie
Limited is in no way connected to Lotus Cars Limited or any other member of the Lotus Group of companies
(“Lotus”) and is entirely independent of Lotus. Accordingly, none of the products offered for sale or supplied by
ReVerie Limited (nor any advice or service offered or provided by ReVerie Limited) are in any way endorsed by
Lotus and Lotus has not tested or approved any such products or services. Accordingly, Lotus shall not under
any circumstances be liable for any loss, claim, damages or any consequential, indirect or special damages
whatsoever arising out of or in connection with the use of products sold or supplied by ReVerie.
Tools Required
10mm spanner
Drill and metric drill bits set 3-10mm
Nutsert or Rivsert insert gun to fit alloy inserts to chassis rails
Metric allen key set
Sandpaper and block of various grits
Parts supplied
R01SW6183
6 off 2 lug M6 threaded anchor nuts
R01SW6146 12 off 3/32” c/sunk 8mm long rivets for anchor nuts above.
R01SW6416 6 off M6 x 16 s/steel button head screws
R01SW6079 6 off M6 x 13.5mm washer
Exige V6 S3 Rear Diffuser Surround Fitting Guide