www.reverie.ltd.uk
Page 1/4
ReVerie Ltd
Tel: 01206 866663
Unit 2, Chandlers Row
02081 235997
Port Lane
Fax: 01206 868144
Colchester
E-mail: [email protected]
Essex, CO1 2HG
Skype: Reverie_Composites
R01SB0465
Introduction
This extended carbon diffuser improves down force as its approximately 120mm longer, featuring
deeper vanes and also further reduces drag. This part is best used with our rear diffuser surround
shroud R01SB0482, otherwise you will have to make your own rear diffuser hangers or infil panel.
Please if Dyno testing the car remove this part and any carbon mid floor or diffuser fitted
as there is a danger without air flow the carbon could ignite.
Parts Available:
R01SB0482
Exige V6 S3 Rear diffuser surround
R01SB0465
Exige V6 S3 Rear carbon diffuser
LOTUS DISCLAIMER
Although ReVerie Limited supply parts for use with/on vehicles manufactured by Lotus Cars Limited, ReVerie
Limited is in no way connected to Lotus Cars Limited or any other member of the Lotus Group of companies
(“Lotus”) and is entirely independent of Lotus. Accordingly, none of the products offered for sale or supplied by
ReVerie Limited (nor any advice or service offered or provided by ReVerie Limited) are in any way endorsed by
Lotus and Lotus has not tested or approved any such products or services. Accordingly, Lotus shall not under
any circumstances be liable for any loss, claim, damages or any consequential, indirect or special damages
whatsoever arising out of or in connection with the use of products sold or supplied by ReVerie.
Tools Required
Small ¼” drive metric socket set
Drill and metric drill bits set 3-10mm
Metric allen key set
Parts supplied
R01SW6242 2 off M8 x 30mm washer
R01SW6049 2 off M8 x 30mm button head socket screw
R01SW6071 11 off M5x20mm cap head s/steel bolt
R01SW6072 11 off M5x25mm washer
Exige V6 S3 Rear Diffuser Fitting Guide