background image

Reverend Guitars

goblin_manual.html[6/30/2015 11:38:50 AM]

Reverend Goblin Amplifier Owner's Manual

CAUTION!
 Do not open amp chassis - risk of fatal electrical shock.
 No user serviceable parts inside amp.
 Never operate in damp or wet conditions.
 Tube and chassis surfaces very hot.
 High volume use can cause permanent hearing damage - always use ear protection.

SET-UP PROCEDURE

INSTALL POWER TUBES - To prevent damage, power tubes are shipped in boxes inside
 cabinet. 
 • Lay amp face down on non-damaging surface. Be sure amp is unplugged.
 • Unscrew and remove back panel.
 • Install power tubes. Alignment pin protruding from center of tube MUST align with hole in
 tube socket - pin has ridge that MUST align with groove in socket hole. Push tubes in firmly.
 • Re-mount back panel.

POWER UP AMP

 - Plug in amp. Turn VOL all the way down. Make sure speaker is

 connected to speaker jack. Turn amp on. Amp is now ready to use.

READ ENTIRE OWNER'S MANUAL BEFORE OPERATING!

 - Please read manual carefully

 to achieve maximum performance and maintain safe operation of your amp.

FRONT CONTROL PANEL

POWER - Powers amp. WARNING: Always have a speaker connected to the amp before
 turning on, otherwise serious damage could occur to amp! VOL should be turned all the way
 down before turning amp on or off. Leave amp on during short break periods, simply turn off
 the volume on your guitar or amp.

SCHIZO - Can be switched while amp is on.

US

 - Transparent midrange with strong bass and treble for classic American clean

 and light overdrive.

LO-FI

 - Softer treble and stronger midrange, for a bluesy grind reminiscent of

 vintage off-brand American amps.

UK

 - Even more gain with a distinctly British upper-mid peak for classic blues-rock

 and hard-rock crunch.

GAIN - Controls the amount of overdrive. Higher settings produce more distortion, lower
 settings produce a cleaner sound. GAIN will affect the volume level, but this can be adjusted
 with the VOL control.

VOL - Controls the overall volume. For the cleanest possible sound set VOL to maximum and
 use the GAIN control as your volume control.

TREB - Controls treble frequencies. TREB control is more responsive when the MID control
 is at lower settings.

Reviews: