Reveal NR3633HSSV User Manual Download Page 30

Page: 30 / 31

----- Sample Serial Label For Refrigerated Case -----

----- Sample Serial Label For Non-Refrigerated Case -----

888 E. Porter Road ∙ Muskegon, MI 49441 Phone: 231.798.8888 Fax: 231.798.4960 www.structuralconcepts.com

SERIAL LABEL LOCATION & INFORMATION LISTED / TECH INFO & SERVICE

Serial Label Location & Information Listed / Technical Information & Service



Serial labels are located near the electrical access on your case.



Serial labels contain electrical, temperature & refrigeration information, as well as regulatory

standards to which the case conforms.



For additional technical information and service, see the

TECHNICAL SERVICE

page in this

manual for instructions on contacting Structural Concepts’ Technical Service Department.



See images below for samples of both refrigerated and non-refrigerated serial labels.

----- Sample Serial Label For Refrigerated Case -----

----- Sample Serial Label For Non-Refrigerated Case -----

888 E. Porter Road ∙ Muskegon, MI 49441 Phone: 231.798.8888 Fax: 231.798.4960 www.structuralconcepts.com

Summary of Contents for NR3633HSSV
































Search results

Summary of Contents for NR3633HSSV

Reviews:

Related manuals for NR3633HSSV

Brands by name

Popular brands

Reveal NR3633HSSV, User Manual

Search results

Summary of Contents for NR3633HSSV

Reviews:

Related manuals for NR3633HSSV

Brands by name

Popular brands