REUTER EP-01-017, Operating Instructions Manual, Page: 50 / 62

SuperCleanox Operating instructions
Page
50
of 62
16.8.2 Workflow dark marking
Workflow dark marking Comment
1

Clean the area of the workpiece to be marked before
starting to mark/label it.
2

Position the template or labelling strip on the workpiece.
3
Tip
Before starting work, wet the templates with water or marking
electrolyte

The templates then adhere to the workpiece better
and do not slip so easily!
4

Switch on the appliance.

The mains switch lights up.
5
SuperCleanox VI HD

Select operating position " II ".

Marking dark

The green LED lights up.
SuperCleanox VI

Select operating position " I ".

Marking dark

The green LED lights up.
SuperCleanox IV+

Select operating position " I ".

Marking dark

The green LED lights up.
Temp
late
Template