SuperCleanox Operating instructions
Page
41
of 62
6
Safety information
Only apply "strong cleaning" for a
short time
.
Then switch immediately back to operating position
"
I
" and continue to work normally!
Never use operating position "
III
" when working with
carbon fibre brushes!
Carbon fibre brushes get very hot.
Only grasp the carbon fibre brush and the Teflon
sliding sheath wearing gloves.
It is better let it cool or rinse it with plenty of water.
Smoke development is stronger when cleaning at
performance level "II".
For chrome/nickel cleaning, please use the required air
extraction systems.
For more information, see the tips for "cleaning" and "polishing".
Table5 Workflow polishing
16.3 Workflow, polishing with carbon fibre brush
Workflow - polishing -
1
Polish the surface after cleaning.
2
Switch on the appliance.
The mains switch lights up.
3
Safety information
Never switch the appliance ON/OFF with the mains
switch repeatedly, in quick succession.
These appliances are equipped with an inrush current
limiting device, which prevents the circuit-breaker
triggering too quickly.
Switching on/off in quick succession may damage the
electronics in the appliance.
Wait at least 30 seconds after switching off before
switching the appliance on again.
4
SuperCleanox VI HD
Select operating position "
I
" or "
II
".
Polishing with brush
The green LED lights up.
