background image

 

Notes on the Operating Manual

 

5

 

 

Pos : 2.2 /00005 Übersc hriften/1.1 Ü berschriften/1.1 Ü bers chriften BDA/11 Er klärungen z u den Sic her heits warnungen @ 0\mod_1222344569771_9.doc  @ 2484 @  @ 1 

 

1.1  Explanations of the safety warnings  

Pos : 2.3 /00003 Standard Kapitel /General  Modul  Warnhi nweis e Er klär ung neu @ 0\mod_1234858329746_9.doc @ 6190 @  @ 1 

 

 

In this Operating Manual we give you the following safety warnings  

 

Serious injury

  may result from failing to heed these safety warnings. We give you 

the following warnings and corresponding content.     

 

 

WARNING

 

 

Type of danger / personal injury 

Source of danger 
– 

Possible consequences if the dangers are not observed. 

• 

Instructions on how the dangers are to be avoided.

 

 

We also use the following signal word box in the text or in the instructions on action 
to be taken: 

 

WARNING 

 

Moderate or mild injury

  may result from failing to heed these safety warnings. 

We give you the following warnings and corresponding content.  

 

 

CAUTION

 

 

Type of danger / personal injury 

Source of danger 
– 

Possible consequences if the dangers are not observed. 

• 

Instructions on how the dangers are to be avoided.

 

 

We also use the following signal word box in the text or in the instructions on action 
to be taken: 

 

CAUTION 

 

In the event of possible 

property damage

 we inform you with the word 

“Instructions” and the corresponding content. 

 

NOTICE

 

Nature of the property damage 

Source of property damage 
– 

Possible consequences if the instructions are not observed. 

• 

Instructions on how the dangers are to be avoided.

 

 

We also use the following signal word in the text or in the instructions on action to 
be taken: 

NOTICE 

 

Pos : 2.4 /00010 Bedienungsanlei tungen Kapitelsamml ung en/------- Seitenumbr uch ----------- @ 0\mod_1222344373758_0.doc  @ 2386 @  @ 1 

 

 

 

Summary of Contents for SM300





















Reviews: