Retsch PP 35, Manual

Page: 39 / 48

Accessories
39
9.2 Wear
Depending on the frequency of pressing operations, tool sliding trays and pressing tools can
become worn.
The tool sliding trays and the pressing tools should be checked regularly for wear and replaced
when necessary.
9.3 Maintenance
To assure the operational reliability of your PP 35 pellet press, conduct visual checks regularly.
In particular, parts that are subject to wear and tear, such as pressing tools and tool sliding
trays, should be checked for proper functioning and the absence of damage. Contact our
service department when necessary.
10 Accessories
Information on available accessories as well as the respective manuals are accessible directly
on the Retsch GmbH homepage (http://www.retsch.com) under the heading "Downloads" of the
device.
Information on wear parts and small accessories can be found in the Retsch GmbH general
catalogue also available on the homepage.
In case of any questions concerning spare parts please contact the Retsch GmbH
representative in your country, or Retsch GmbH directly.