Retsch Mixer Mill MM 500 nano, Manual

Page: 75 / 95

Device control
75
Element Function
SE1
“MyRetsch”
Shows QR code in the display.
See chapter "MyRetsch".
SE2 Signaling device (on/off) This can be used in order to switch the signaling device on
or off.
SE3 Remote When the function is selected, the device is linked to a
smartphone, tablet or PC.
The device can then only be operated via the coupled
device. The stop button interrupts the grinding and the
connection to the app.
See chapter “Remote”.
SE4 Brightness Adjusting the display brightness.
SE5 Date and time Setting of date and time.
SE6 Software version Display of software version.
Display (program control): Firmware (device control).
SE7 Serial number The serial number of the device is displayed here.
SE8 Service environment Enables a service technician to access the service
environment.
SE9 Operating hours Display of the operating hours.
SE10 Software update Software update of the device via USB data carrier
7.11.1 MyRetsch
This section gives access to the Retsch GmbH web portal via a QR code. This may be read using
a smartphone with the appropriate software and an internet connection. Additional information
such as tips and tricks and an application database can be accessed.

Tap on the MyRetsch section to display the QR code.