Retsch Mixer Mill MM 500 nano, Manual

Page: 10 / 95

Safety
10
2.3 Obligations of the operating company
2.3.1 Provisions
The user bears responsibility for ensuring that people working with the device and the
corresponding equipment have taken note of and understood all relevant safety regulations.
2.3.2 Personnel
•
Ensure that only trained personnel are deployed whose training and experience enable
them to recognise risks and avoid potential hazards.
•
Staff should be given regular training on using the device, and in particular regarding
sudden events.
•
Only allow trainee staff to work on the device when they are being supervised by
qualified personnel.
•
Check the safety awareness of staff regularly.
•
Define staff responsibilities according to qualification and job description.
•
Provide staff with personal protective equipment (PPE).
•
Ensure that the following conditions have been met:
–
Staff have read and understood this Manual, and in particular the chapter on
Safety .
–
Staff are aware and take note of the relevant accident prevention and safety
regulations.
–
Staff wear the designated personal protective equipment (PPE) when working with
the device.
2.3.3 Workstation and device
•
Ensure that there is sufficient lighting and ventilation at the workstation.
•
Ensure that the exhaust air is properly conducted outside.
•
All signs on the device must be kept in a legible condition.
•
Ensure that all inspections and servicing work prescribed in this Manual are carried out.
2.3.4 Qualification of personnel
Work/operating phase Qualification
Transport
Installation
Commissioning
Operation
Controlling
Servicing
Disposal Qualified employee who has been trained in
the safe use of the device.
Work on the electrical equipment on the
device Electrician who, on the basis of his/her
training, knowledge and experience is able
to evaluate the work assigned and
recognise potential hazards.