Controlling the Device
44
7.7.2 Remote
Selecting Section (
E2
) enables the machine to be controlled using a mobile phone, tablet or PC.
Press Section (
E2
) to establish a remote connection.
Once the remote connection has been established, control is exclusively using the mobile
phone, tablet or PC. Only the stop button for interrupting the process can be selected on the
machine itself. All other functions on the touchscreen are inactive.
Further information on connecting the machine to the Wi-Fi module and on the remote controlling of the
machine can be found in the separate Retschbox manual.
7.7.3 Brightness
In section (
E3
), the brightness of the display can be set between 6 % and 100 %.
Press on section (
E3
). The background is highlighted in grey and the border of the rotary
knob lights up blue.
Turn the rotary knob (
B4
) until the desired brightness of the display is reached.
The set value is applied as soon as section (
E3
) or another section is pressed again, or as soon
as the settings are exited.
7.7.4 Software Versions
The following two software versions of the machine can be viewed in Section (
E4
):
Display (
E4.1
) (program control)
Firmware (
E4.2
) (device control)
Fig. 20:
Software versions
The current software versions are shown in succession.
7.7.5 Operating Hours
In section (
E5
), the operating hours of the device are displayed in hours, minutes and seconds
(hh:mm:ss). The process times, i.e. the times between start and stop are counted. The time
cannot be manipulated.
E4
E4.1
E4.2
Summary of Contents for GM 200
