Controlling the Device
37
7.4.2 Stop Process
The grinding process is terminated automatically after the set process time has elapsed.
However, the grinding process can be stopped manually at any time.
Press the
button to stop the grinding process.
The hood opens automatically after the set process time has elapsed, or the grinding
process has been stopped manually.
7.5 Programme Mode
Often different but perseverative sample materials with individual grinding parameters are being
processed. For such samples, individual grinding parameter sets can be saved in programmes
and retrieved when needed.
There are eight programme memory positions available. The following grinding parameters can
be stored in the individual programmes:
Speed
Process time
Direction of rotation
Interval
Please refer to Chapter "
" for a detailed description of the parameter
settings.
7.5.1 Select a Programme
Fig. 12:
Functions of the programme mode in the programme view
B1.4
B1.5
B3.3
B3.1
B3.4
B3.6
Summary of Contents for GM 200
