DustMon RD 100 using PC control unit / software installation
34
4
Filter
Number of measurement points that calculate the results (up to 1000 measurement
points per second). Using the filter you can set the number of averaged values, i.e. a
sliding average over x measurements to smooth the course of the curve.
5
Adjustment/Factor
Entering a factor (e.g. 1 or 2) enables the results to be adjusted here if required.
6
Com interface
Setting/Selection of the interface
7
Selection of values
The marked options are displayed in the table below the graph. The values can be
selected individually.
8
Licensing
Details of the end user or the company
9
Language
The language can be selected using the dropdown menu (further languages can be
entered by the user).
If desired, it is possible to change the logo that appears on the print-out (file format: jpg or bmp.
Height of the logo: max. 60 pixels).
Fig. 22:
Changing the logo
Login via the "System" menu item
Select "Settings"
The "Setup" dialog box opens
Click the "Select Image" button
Fig. 23:
Selecting a file
Select the folder in which the logo has been saved
Select the file and then click "Open"
8.3 Starting the measurement using the DustMon RD 100 software
1. Place the material in the sample container of the DustMon RD 100 (typically 30 g).
2. Check and where necessary change the folder in which the results are to be stored
(1).
3. Assign a file name
(2)
under which the results will be stored.
