First Commissioning
23
5
First Commissioning
WARNING
W3.0015
Risk to life caused by an electric shock
Connection to socket without a protective earth conductor
−
Connecting the device to sockets without a protective earth conductor can
lead to life-threatening injuries caused by an electric shock.
•
Always operate the device using sockets with a protective earth
conductor (PE).
WARNING
W4.0002
Danger to life through electric shock
Damaged power cable
−
Operating the device with a damaged power cable or plug can lead to life-
threatening injuries caused by an electric shock.
•
Before operating the device, check the power cable and plug for
damage.
•
Never operate the device with damaged power cable or plug!
NOTICE
N10.0022
Electrical connection
Failure to observe the values on the type plate
−
Electronic and mechanical components may be damaged.
•
Connect the device only to a mains supply matching the values on
the type plate.
tand hat
The DustMon RD 100 must be connected to the power supply on site for initial commissioning.
Ensure the following before connecting the device to the power supply:
•
The application site complies with the installation requirements;
•
The device is securely and firmly in place;
•
The power values for the device (type plate) correspond to the values of the power
supply at the site.
5.1 Instrument Assembly
The DustMon RD 100 can be assembled and ready for taking measurements in minutes.
5.1.1 Sample Collection Box
The sample collection box or chamber is a removable stainless steel assembly that slides in
and out of the front of the DustMon RD 100 analyzer. It captures and contains each sample and
subsequent dust cloud during the measurement cycle. It must be fully seated into the instrument
cavity before each measurement.
