Controlling the Device
33
The process time is stopped.
Continue the process:
Simultaneously press the
button (
H2
) and the push button START (
G
) to continue with
the sieving process.
End the process:
Press the
button (
H1
) to end the sieving process.
7.5 Time
Fig. 14:
Time setting for continuous operation (left) or with a process time (right)
The AS 200 tap can be operated either in continuous operation or for a certain time between 1
and 99 minutes. When the device is switched on, the last used setting is displayed.
Press the
(
H4
) or
(
H3
) button of the time display to set the desired process time.
Press and hold the
or
button to extend or reduce the process time in fast steps.
To change to the continuous operation, fall below the duration of 1 min by pressing the
button, or exceed the duration of 99 min by pressing the
button. The time display now
indicates "
".
The process time can also be changed during operation by pressing the
or
button.
H4
H3
Summary of Contents for AS200 tap
