8
Copyright © 2017 Retro Manufacturing, LLC
STEP 1: Install the Radio Face
Plug the ribbon cable included with the Motor 6 body into
the radio face. After plugging in the face, attach it to
the body and tighten with the four radio face mounting
screws provided in the radio face box (the screws are very
small and are in the hardware bag with the shaft nuts).
The RetroSound
®
logo on the Motor 6 body should be facing
upwards. Take care to not install the face to the body upside down.
NOTE: Optionally, the radio face can be mounted remotely up to
nine feet away from the Motor 6 body using an optional Face to Body
Extension Cable (sold separately). In some installation applications, a
bracket can be used to mount the face to the body at an angle.
INSTALLATION INSTRUCTIONS
Figure 1 - Attach the Radio Face
Radio Face
