9
INSTALLATION INSTRUCTIONS
STEP 2: Install InfiniMount Brackets
Attach each InfiniMount
bracket to the correct side of the radio
using the supplied screws. Before tightening the screws, you need
to adjust the brackets up, down, forward or backward. You may
also rotate, cut, or bend the brackets to achieve the perfect fit
(See Figure 2). Complete the assembly with at least two screws
tightened on each side.
NOTE: In some installations the brackets must be moved far enough forward or
backwards or rotated so that only two screws will align with the threaded screw holes
on the radio. Two screws are sufficient to hold the brackets in place.
NOTE: You may need to cut, trim or bend the brackets to achieve a perfect fit. You
can even drill new mounting holes into the bracket if you need to. The InfiniMount
system is designed to be modified. Modifying your brackets will NOT void your warranty.
Figure 2 - Attach InfiniMount Brackets
R
