manualshive.com logo in svg

RetroSound Grand Prix, User Manual

Share
Download
RetroSound Grand Prix User Manual Download Page 3

2

[email protected]

 General Features

General Features 

(available features vary by model)

•  AM/FM tuner with 30 presets and RDS 

(Radio Data System)

•  DAB+ tuner with 30 presets 

(available on export models)

•  HD Radio™ receiver 

(Motor 4HD Only)

•  Selectable international tuner frequencies

•  Built-in MOSFET amplifier 

•  Separate power antenna and amplifier turn-on leads

•  Rear-mounted auxiliary inputs 

(available on select models)

•  3 EQ presets plus user-controlled bass, mid-range, treble, fader, 

and balance adjustments

•  Selectable 32,000 color LCD illumination with user presets

       

(available on select models)

•  Rear-mounted USB ports play MP3, WMA and FLAC files

       

(available on select models)

•  USB charging at 2.1 amps (total) for cell phones and devices 

(on 

select models and devices)

•  Built-in Bluetooth® for hands-free calling and audio streaming 

Microphone included. (available on select models)

•  Multi-channel pre-amp outputs 

(front, rear, subwoofer)

       

(available on select models)

•  The only SiriusXM®-ready™ classic car radio 

       

(SiriusXM® Connect vehicle tuner and subscription required)

       (Motor 4HD Only) 

•  Made for iPod®/iPhone®

 

(Motor 4HD Only)

•  Wireless audio browsing from your iPhone® or Android device 

(Motor 4HD Only)

•  Manufacturer warranty 

(see page 29)

Summary of Contents for Grand Prix

































Reviews:

No comments

Brands by name

Popular brands

Load more brands