Instruction manual
Retro roller model F1 898
Imported by Van der Meulen.
www.retroroller.eu
PLEASE NOTE! Assembly must be done
by an adult. Keep out of reach of young
children because of the small parts.
IMPORTANT:
1. For the child’s safety, all assembly steps must be
carried out properly. Incorrect assembly could
cause injury.
2. Lubricate moving parts regularly or after long-
term use.
3. Ensure that all nuts and bolts have been tightened
before use. Check nuts and bolts regularly and
tighten where necessary.
4. Components showing signs of wear should be
replaced immediately.
5. The child should never be left unattended when
riding in the vehicle.
1
Tool required:
short
or
Part no x Qty
Some parts may hav already been pre-assembled
upon receipt.
2
2
3
HARWARE SET COMPONENTS
No.
*898.8001
*898.8002
*898.8003
*898.8004
*898.8005
*898.8006
Qty
1
8
1
8
4
4
Description
Hexagon locknut
Hexagon locknut
Machine screw
Machine screw
Self tapping screw
Hub cap
Spec.
M4
Ø
3/16”
M4x24mm
Ø
3/16x13mm
Ø
4/13mm
Ø
10mm
* Standard hardware items may be purchased locally
(898.001) x1
(898.8001) x1
(898.002) x1
(898.003) x1
(898.004) x1
(898.005) x1
(898.006) x2
(898.007) x1
(898.008) x4
(898.009) x1
(898.010) x1
(898.011) x1
(898.8002) x8
(898.8003) x1
(898.8004) x8
(898.8005) x4
(898.8006) x4
