background image

RET1020

Retina Vandal Proof IR Dome Camera

with SONY High Resolution CCD Sensor

USER MANUAL

INTRODUCTION

The RET1020 IR color camera employs the latest SONY technology optical components. 
This day/night, indoor/outdoor model features a water-resistant housing. It will provide 
rich color, high definition pictures. Easy to install and convenient to use. It will adapt to 
most CCTV systems. Please read this instruction manual carefully to ensure proper use 
of the product.

IN THE BOX

(1) RET1020 Vandal Proof IR Dome Camera
(1) User Manual

PRODUCT OVERVIEW

Sensor (CCD)

SONY 1/3” High Resolution CCD Sensor

Auto Gain Control (AGC)

Built-in auto gain control (AGC) circuit. The color camera can provide high definition 
picture in low light conditions.

Auto-Electronic Shutter (AES)

Built-in auto electronic shutter function. The color camera’s AES speed can reach 
1/1000,000.

Gama Characteristic

Camera Gama characteristic is 0.45.

Scanning Mode 

NTSC or PAL mode.

Night-time Vision

0 Lux with IR Red ON.

CONNECTIONS

To prevent fire or shock hazard, do not expose the unit to prolonged 
contact with water.

This symbol is intended to alert the user to the presence of important 
operating and maintenance (servicing) instructions in the literature 
accompanying the application.

This symbol is intended to alert the user to the presence of uninsulated 
“dangerous voltage”  within the product’s enclosure that may be of 
sufficient magnitude to constitude a risk of electrical shock to persons.

CAUTION

:  TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVER 

OR BACK. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.

CAUTION

:  TO PREVENT ELECTRICAL SHOCK AND RISK OF FIRE HAZARDS, DO NOT 

USE OTHER THAN SPECIFIED POWER SOURCE.

CAUTION

: PLEASE NOTE THE CAMERA’S OPERATING TEMPERATURE AND ENVIRON-

MENT REQUIREMENTS. AVOID USING THE CAMERA AT EXTREME TEMPERATURES.

CAUTION

: NEVER POSITION THE CAMERA TO FACE THE SUN OR A BRIGHT OBJECT. 

THIS MIGHT DAMAGE THE CCD.

CAUTION

: DO NOT MOUNT THE CAMERA NEAR A HEAT SOURCE.

CAUTION

: USE ONLY THE RECOMMENDED POWER SUPPLY.

CAUTION

: WHEN USING THE CAMERA IN LIGHTNING CONDITIONS, BE SURE TO 

INSTALL A SURGE – PROTECTION DEVICE, OR DISCONNECT POWER SUPPLY PLUG 
AND CABLE.

CAUTION

: IN ORDER TO CAPTURE HIGH QUALITY PICTURES, THE POWER SUPPLY’S 

CABLE AND VIDEO OUTPUT CABLE SHOULD NOT BE TOO LONG.

WARNINGS

CAUTION

Risk of Electrical Shock  DO NOT OPEN

CAUTION

Risk of Damaging Camera

Link wire rule

: 

Power

 

Video

 

Moniter

DC 12V Power Supply

*sold separately

Video

12V DC

RET1020

Reviews: