FM/MW/SW/AIRBAND RECEIVER
1 2 3
4
5
6
7
8
12
13
14
15
16
11
9
17
18
19
10
20 21
22
23
24
25
1.Display screen
2.Locking switch
3.Power switch / sleep switch
4.Rotary knob-Multi Function
5.Up tuning / adjustment time -
6.Down tuning / adjustment time +
7.Radio station storage a
8.Radio station storage address -
9.High volume
10.Low volume
11.Band switching
12.Short wave meter band
13.Stored radio station scanning
14.Timing ON / OFF
15.Clear
16.Radio station storage
17.Backlight ON / OFF
18.Frequency input
19.0...9 number key
20.Telescopic antenna
21.Support frame
22.Wrist strap
23.Headset jack
24.External power source jack
25.Battery compartment
EXTERNAL VIEW AND
FUNCTION INDICATION
2
PRESET
STEP
LOCK
ALERT
SQ
FM
MW
SW
AIR
1
4
7
8
9
11
3
6
10
5
LCD SCREEN DISPLAY
1.Timing ON indication
2.FM band display
3.MW band display
4.SW band indication
5.Airband display
6.Frequency display
7.MHz - MW/SW Band
8.KHz - FM/AIR
9.Clock display/
Volume level
10.Stereo symbol
11.Sleep symbol
+
-
R6C SIZE AA 1.5V NO.104
+
-
R6C SIZE AA 1.5V NO.104
R6C SIZE AA 1.5V NO.104
-
+
1.Open the battery cover and load three pieces of 'AA' batteries into the
battery compartment ensuring the correct polarity is observed (shown
in Figure in the right).
2.Close the battery cover (shown in Figure in the right).
3.We always suggest using Alkaline batteries for performance and prevents
leakage.
BATTERY LOADING
POWER SWITCH
(Figure 1)
Short
press
Short Press the power switch key (3) for powering 'ON' the radio, as shown in
Figure 1. To Power off again a Short Press.
VOLUME ADJUSTMENT
1.Volume has a levels of 0- 30. The default ON volume is 20 sections. If the volume
is less than V20 when you power off the volume will automatically restored to level
V20, however if the volume is greater than V20 when you power off the volume
when turned back on will be at that level.
2.Methods for setting the volume:Method 1: In the ON state, press the round volume
key (9) marked Max to adjust the volume high until the highest volume 30. Press
round volume key (10) marked Min to adjust the volume low until the lowest volume
0 (as shown in Figure 2).
Prompt: Press the Round Max or Min volume keys to adjust the volume quickly.
Method 2: Only when the volume digits are displayed [LCD 9], rotate rotary knob
(4) clockwise and anticlockwise to adjust the volume within the range of 0~30 (as shown in
Figure 2).
BAND SWITCHING
(Figure 3)
When the radio is powered on, press the band switching key (11) to
select to receive the FM, MW, SM and air band programs (as shown
in Figure 3).
SHORT WAVE METER BAND
(Figure 4)
If the Radio is in any band and the meter key (12) to is pressed then
the radio will switch the short wave meter bands (as shown in Figure 4).
Pressing meter key progressively will take you
through the levels :2.30-3.20-3.90-4.75-5.95-7.10-9.50-11.65-13.60-
15.10-17.50-21.45
(Figure 5)
MANUAL ROTARY TUNING
1.Press the short wave meter band key (12) and select the meter band similar
to the frequency of the radio station to be listened to (please skip this step
when you listen to the FM and MW).
2.Rotate the rotary knob (4) clockwise and anticlock wise to select the radio
station to be listened to (as shown in Figure 5).
Prompt:
1.When there are many radio stations for the neighboring frequencies,
which disturb you to listen to the radio station, please use the manual
rotary tuning frequency to realize the best receiving effect.
2.If the rotary knob does not work, please check whether it is locked.
(Figure 6)
MANUAL RADIO STATION SEARCH
In the ON state, press the up tuning key (6) for searching the radio station
forward.Press the down tuning key (5) for searching the radio station
backward. Thefrequency will change once per press until you find the radio
station (as shown in Figure 6).
Notes: The manual radio station search is mainly used for covering the
shortage of scanned storage, because the manually searched radio
station and the radio station stored through scanning may not be easy
for you, so in this mode you can search the radio stations manually.
AUTOMATIC RADIO STATION SEARCH
In the ON state, press the up tuning key (6) and automatically search the radio station forward 2 seconds
later. Press the down tuning key (5) and automatically search the radio station backward 2 seconds later.
When you receive the radio station, the search will automatically stop (as shown in Figure 12).
During automatic search, it can be stopped by pressing any key.
Notes:
1. The automatic radio station search is suitable for searching the radio station with strong signals.
2. During automatic radio station search, if the digits displayed on the display screen change slowly, it
means that there may be radio stations with weak sig-nals nearby, and the manual search and using the
rotary tuning control.
Prompt:
1.In the FM band, press the up tuning or down tuning key once, the frequency will be increased or
decreased by 0.1MHz.
2.In the medium band, press the up tuning or down tuning key once, the frequency will be increased
or decreased by 9KHz.
3.In the short band, press the up tuning or down tuning key once, the frequency will be increased or
decreased by 0.005MHz.
4.In the air band, press the up tuning or down tuning key once, the frequency will be increased or
decreased by 0.005MHz.
5.Press the up tuning key, the frequency will be searched in the ascending order; press the down
tuning key, the frequency will be searched in the descending order.
ENTER RADIO STATION FREQUENCY DIRECTLY
(Figure 7)
(Figure 8)
STEP
SLOW
1
2
3
5
6
8
9
0
4
7
FREQUENCY
ENTER
STEP
SLOW
STEP
SLOW
1
2
3
5
6
8
9
0
4
7
FREQUENCY
ENTER
1.When the radio is ON, press the frequency input key (18), the frequency
will disappear (as shown in Figure 7).
2.Press the number key to enter the required radio station frequency (as
shown in Figure 8).FM band: You can ignore the decimal point.For example,
when you need to enter 89.8MHz, press 8, 9 and 8.MW band: Enter 9K
stepping frequency.SW band: When you need to enter 13.70MHz, you can
adopt the precision and fuzzy entry.
Precision entry:
Press 1, 3, 7, 0 and 0, enter to the 3rd decimal place.
Fuzzy entry:
Press 1, 3 and 7, and press the frequency entry key for confir-
mation.
3.If the entered numbers are incorrect, press the clear key (15) to cancel the
entered numbers one by one.
4.After numbers are entered, the radio will automatically receive the entered
radio station frequency (as shown in Figure 8).
5.If you want to reenter numbers, repeat the operation from step 1 to step 3.
(Figure 9)
STEP
SLOW
PRESET
SCANNED STORAGE
1.
, the radio will automatically
scan the radio station from the lowest frequency to the highest freq-
uency of this band once, and save the scanned radio stations from the
currently radio station storage address in order (as shown in Figure 9).
2.During scanned storage, press the scanned storage key to stop scanning.
3.After scanned storage, automatically enter the first scanned radio station
(the radio station scanned each time may be different).
Prompt:
1.Before using scanned storage, please adjust the radio according to
the contents of "antenna use" to scan more radio stations.
2.When you listen to the radio station stored through scanning, if it is unclear or noisy, please
make a minor adjustment through manual radio station search or use the rotary radio station
tuning.
3.If the scanned storage function is used, when you receive the radio station, the original stored
radio station will be covered.
(Figure 10)
(Figure 11)
(Figure 12)
RADIO STATION STORAGE
BACKLIGHT
This radio is provided with 120 stored radio stations. 30 radio stations are
stored for each band. The default storage address starts from 0. Moreover,
the stored radio stations will not be lost in case of long-term outage.
1.When the radio is ON, select the radio station to be stored (the radio
station can be received through entering the radio station frequency
directly, manual rotary tuning, automatic search or manual search).
2.Press the radio station storage key (16), the radio station storage
indicator "POO" on the display screen will flash, and select the radio
station storage address within 3 seconds of flash (as shown in Figure 10).
The operation methods are as follows:
Method 1:
Press the radio station storage a (7) or press the radio
station storage address - key (8) to select the radio station storage address
(as shown in Figure 14).
Prompt:
You can select the radio station storage address quickly by pressing
the radio station storage a or radio station storage address - key.
Method 2:
Rotate the rotary control knob (4) clockwise and anticlockwise to
select the radio station storage address (as shown in Figure 11).
3.After the radio station storage address is selected, press the radio station
storage key (16) for confirmation, the radio station frequency will be stored
in your set address (as shown in Figure 12).
Press the backlight key once to turn on the backlight. Repress it to turn off the backlight.
Long press the scanned storage key(13)
TR608
1
2
