Resvent iHope RS Series, User Manual

Page: 79 / 261

5-5
5. System Settings
4. After exporting is completed, select [
Remove USB
Device
] to remove the USB device.
NOTE
• If you need to check the exported data, please
contact the servive providers.
Figure 5-5.Export window
5.3.3 Transfer Settings
You can export or import settings, while unit is in
standby.
To export settings,
1. Make sure that the machine is in Standby status.
2. Insert the USB device into the USB connector of the
ventilator. The USB symbol key is highlighted on the
main screen .
3. By selecting the USB symbol key, the system will
open the Export interface.
4. Select [
Maintain
] → Enter system password →
[
Export
]. Select the [
Export
] key in configuration
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX