Doc 0223520 rev N
Page 31 of 39
Not subject to issue control when printed
Reassembling - LO85 Model shown
Re-assembling: The LED cover is clicked in place into top HSG. Insert PB into top HSG with the widest side towards batt door. For LO85 models:
Add TGL/LID to the module. TGL/LID can also be replaced/mounted without separating the HSG parts - see next page. For the 90 models: TGL/LID
must be added after mounting the TOP/BOT HSG.For LO85 models: Place batt door and mount the pin to fix it. For the 90 models: Batt door must
be added after mounting the TOP/BOT HSG
PB in place
LED
cover
PB to be
inserted
Make sure the PB and toggle silicone caps are in place before inserting the module into the top HSG. The top HSG must be fitted correctly into the
recess in the module when mounting. Mount the bot HSG by gently sliding it towards the batt door as shown. Use a finger to press to make sure
the bot HSG is correct in place
Pin for bat
door